ISO 9001:2015
Polymer modified, grey cement-based thin-set tile adhesive for fixing high porosity tiles — ceramic, clay, terracotta and quarry tiles of regular size. Designed for indoor horizontal and vertical surfaces.
Scope of Use
Open the pack and place the required amount of Tile Adhesive Silver in a clean bucket.
Add 28 to 30% water in accordance to material lump for best mixing results. Do not add excess water.
Use a mechanical stirrer for best results in coverage and consistency of the mix.
Apply the mixed adhesive evenly on the surface using a notched trowel. Press tiles firmly into place.
Allow sufficient setting time before grouting. Remove excess adhesive before it hardens.
| Product Name | Delite Tile Adhesive Silver |
| Type / Standard | C2TE Type T1 — Polymer Modified Thin-Set Adhesive |
| Color | Grey |
| Packaging Size | 20 kg bag |
| Coverage | Approximately 25 to 30 sq.ft per 20 kg bag, depending on tile size and application technique. Up to 10 mm bed thickness. |
| Water Ratio | 28–30% by weight of powder |
| Open Time | 20–25 minutes at 23°C |
| Pot Life | Approximately 1–1.5 hours |
| Shelf Life | 15 months from date of production when stored in undamaged original packaging in dry conditions |
| Application Temperature | +5°C to +35°C |
| Substrate | Cement plaster, cement-lime plaster, cement screeds, concrete, cement ground coat |
| Certification | ISO 9001:2015 certified manufacturing facility |
Surface Preparation: Ensure the substrate is clean, dry, structurally sound and free from dust, oil, grease or loose particles. Dampen the surface in hot or dry conditions.
Mixing: Pour measured water into a clean bucket, then slowly add the powder while stirring. Mix mechanically for 3–4 minutes until a smooth, lump-free consistency is achieved.
Application: Apply the adhesive to the substrate using a notched trowel at a uniform thickness. Comb parallel ridges across the surface.
Tile Placement: Press tiles firmly into the adhesive with a slight twisting motion, ensuring full contact. Use spacers for consistent joint width.
Curing: Protect from foot traffic and water for 24 hours minimum. Allow 24–48 hours before grouting. Full strength achieved in 28 days.
Product Advantage
Advanced polymer modification delivers superior bond strength on cement, concrete and plaster substrates — preventing tile drop-off and debonding over time.
Smooth consistency enables even spreading with a standard notched trowel. No priming required on most substrates — faster installation, less wastage on site.
25–30 sq.ft coverage per 20 kg bag at up to 10 mm thickness. More tiles laid per bag compared to standard OPC-based adhesives — reducing overall project cost.
ISO 9001:2015 controlled manufacturing ensures batch-to-batch consistency. 15-month shelf life in original packaging gives contractors and stockists confidence in every purchase.
Contact our team for pricing, bulk orders, technical guidance, or to place a direct inquiry. We respond within 2–4 business hours.